DATAMAX H-4606x

IMPORTANT NOTICE - Sage Pay has withdrawn support for your browser for security reasons. If you would like to make a purchase with a card you will need to switch to a current browser such as FireFox, Chrome or Internet Explorer 9 or above. Please accept our apologies for the inconvenience.

END OF LIFE NOTICE

This product has been discontinued by the manufacturer.

 

Some compatible products may still be available. Please see the menu above.

If you need assistance in selecting an alternative please ask for Help.

Big Image

Big Image

DOWNLOADS

Honeywell Datamax provides the following data sheet for the H-4606x.

Datamax H-4606x Data Sheet

Buyers Guide

GENERAL DESCRIPTION

The H-Class X family is the top of line in the Datamax range of stationary label printers.

It is positioned above the E-Class Mark III desktop family, the compact M-Class Mark II industrial family, the I-class and I-Class Mark II mid-range industrial families, and the H-Class heavy duty industrial label printers.

The introduction of the H-Class X series of printers represents a major improvement over it's H-Class predecessors, both in terms of performance and facilities.

The H-Class X printers come as standard with the addition of Wired Ethernet, USB Host Ports and a SDIO card slot. For most models the media supply hub is metal rather than plasic and where a rewinder is used it is separately powered. Finally, perhaps the more visually obvious enhancements are the larger screen on the font panel and the increase in the height of the printers which allows the internal rewinding of a full roll of printed labels on an industry standard 76mm (3") core.

The family consists of three "4 inch", two "6 inch" and one "8 inch" printer.

The 203dpi H-4212X, the 300dpi H-4310x and the 600dpi H-4606x "4 inch" printers have maximum print speeds of 12ips, 10ips and 6ips respectively.

The 203dpi H-6212x and the 300dpi H-4606x "6 inch" printers have maximum print speeds of 12ips and 10ips respectively.

The 300dpi H-8308X "8 inch" printer has a maximum print speed of 8ips.

The H-4606x measures 415 x 321 x 489mm (16.4 x 12.6 x 19.3") HxWxD, weighs 21.4kg (47lbs) and comes in black.

THERMAL TRANSFER AND DIRECT THERMAL

All H-Class X printers have a ribbon mechanisms and can print on Thermal Transfer (TT) label media.

These printers can also print on DT label media without using a ribbon.

PRINTER LANGUAGES AND FONTS

The H-4606x printer runs under Datamax DPL but can emulate Zebra ZPL or Intermec IPL.

This allows the H-4606x to be used as a drop-in replacement for Zebra or Intermec printers in appropriate situations.

In addition to the standard European fonts, Japanese Kanji, Simplified Chinese and Korean Hangul are available. A combination of emulated ZPL and Kanji or Chinese fonts is also available.

INTERFACE OPTIONS

All H-4606x models come as standard with USB, Serial, Parallel, Wired Ethernet, USB Host Ports and a SDIO card slot.

Some factory delivered models also offer Wireless 802.11 a/b/g, a GPIO Applicator interface or the combination of both.

These last two options can also be added after delivery using the field installable:

- Wireless LAN Option

- GPIO Applicator Interface Option

MEDIA HANDLING OPTIONS

The standard model offers tear-off where the printed stationery is removed by pulling it against a tear bar.

Other factory delivered models are available with:

- an Internal Rewind

- a Basic Label Peel and Present mechanism with Rewinder

- a Heavy Duty HD Label Peel and Present mechanism with Rewinder

- a Label Present Sensor without Rewinder

- a Label Present Sensor with the Rewinder

- a Cutter.

The Internal Rewind Option can be used to rewind full rolls of printed labels on 76mm (3") cores.

Labels can be individually dispensed partly peeled using either the Basic Peel and Present Sensor Option or the heavy duty HD Peel and Present Sensor Option. Both of these require the Internal Rewinder to take up the spent liner.

The Label Present Sensor can be used with tear-off to dispense single labels on the backing.

The Cutter Option is available to cut the printed label stationery across the roll.

Only one of these options can be installed in the printer at any one time, but the printer can be converted between them using the field installable:

- Internal Rewind Option

- Peel and Present Option

- HD Peel and Present Option

- Label Present Sensor

- Cutter Option

On the supply side the printers come as standard with a motorised 76mm (3") media hub.

The printer comes as standard with dual label sensors. The first is used with die-cut labels, or labels and tags punched with holes or notches. The second works with black registration marks which are printed underneath the label liner or tag.

RFID OPTIONS

Some factory delivered H-4606x models are available with fully functioning HF or UHF RFID transponders.

Alternatively other factory delivered H-4606x models come with a UHF RFID Ready option which can be upgraded after delivery using the field installable:

- RFID Ready Upgrade Option

Please note that the RFID Ready, HF RFID or UHF RFID Options cannot be installed in the printer after delivery.

BARCODE SCANNER OPTION

The Linear Barcode Scanner option reads picket fence 1D printed barcodes as they emerge from the printer.

The Barcode Scanner Option is available in the factory delivered models except where any of the HF RFID, UHF RFID or UHF RFID Ready options is already installed.

If required the Linear Barcode Scanner can be added as a field installable upgrade:

- Barcode Scanner Option.

MEMORY AND REAL TIME CLOCK

The H-4606x printer comes as standard with 8MB Flash, 16MB DRAM memory, and a Real Time Clock RTC.

LABEL MEDIA

The label stationery can be mounted inside the printer in outside wound rolls of up to 203mm (8") OD rolls on 76mm (3") cores.

The printer can also handle fan-folded stationery. This is placed externally and is fed into the printer via slots in the casing.

The label media can be 25.4 to 118.1mm (1 to 4.65") wide with a maximum print width of 105.7mm (4.16").

The maximum print length is 2539.75mm (99.99") and the minimum print length is 6.35mm (0.25") for tear-off and rewind modes, and 25.4mm (1") for the cutter and for peel-off.

THERMAL TRANSFER RIBBONS

The H-4606x has a ribbon mechanism and can be used for Thermal Transfer (TT) printing.

The printer can be used in Direct Thermal (DT) mode, without a ribbon, to print on Direct Thermal (DT) label stationery.

The ribbons required for Thermal Transfer (TT) printing are on 25.4mm (1") cores, can be inside or outside coated, up to 600M (1968') in length.

Ribbons for the H-4606x can be from 25.4 to 114.3mm (1 to 4.5") wide.

If you need any help please ASK FOR HELP.

ADD-ONS

An outstanding range of field installable upgrades and accessories is available.

Please choose from the following menu.

WIRELESS LAN OPTION

This option adds Wireless 802.11 a/b/g LAN communications to the printer.

£427.72

Buy the Honeywell Datamax OPT78-2873-01.

£513.26

inc VAT

Honeywell Datamax OPT78-2873-01.

DMXrfNet III 802.11 B/G WiFi Card.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

GPIO APPLICATOR INTERFACE OPTION

This general purpose I/O option is generally used for interfacing with Label Applicators.

£293.67

Buy the Honeywell Datamax OPT78-2649-01.

£352.40

inc VAT

Honeywell Datamax OPT78-2649-01.

GPIO Applicator Interface Card.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

 

 

£POA

Honeywell Datamax DPO32-2603-01.

GPIO RJ-45 to DB9 Serial Cable Adapter.

 

 

INTERNAL REWIND OPTION

This option adds internal Label Rewinding to the printer.

£246.86

Buy the Honeywell Datamax OPT78-2627-01.

£296.23

inc VAT

Honeywell Datamax OPT78-2627-01.

Powered Internal Rewind Option Kit.

Kit Consists of the Rewinder, Inner Rewinder, Rewinder Retainer, Arc Plate and Media Retainer.

Rewinds Full Rolls of Printed Labels or Liner up to 118.1mm (4.65") in Width on 76mm (3") Cores.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

BASIC PEEL AND PRESENT SENSOR OPTION

This option adds the Basic Label Peel and Present capability to the printer.

£94.27

Buy the Honeywell Datamax OPT78-2655-01.

£113.12

inc VAT

Honeywell Datamax OPT78-2655-01.

H4 Basic Peel and Present.

Partly Peels Label and Waits for Label Removal before Printing the Next Label.

Needs to be used in Conjunction with the Internal Rewind to Take up the used Liner.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

HD PEEL AND PRESENT SENSOR OPTION

This option adds the heavy duty HD Label Peel and Present capability to the printer.

£148.98

Buy the Honeywell Datamax OPT78-2617-01.

£178.78

inc VAT

Honeywell Datamax OPT78-2617-01.

Heavy Duty Peel and Present Plate.

Needs the Internal Rewind.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

 

LABEL PRESENT SENSOR OPTION

This option allows single labels to printed in tear-off mode.

Honeywell Datamax OPT78-2619-01.

H4 Present Sensor Kit.

Waits for Label Removal before Printing the Next Label.

This product has been discontinued and is sold out.

For advice on alternatives please ASK.

 

CUTTER OPTION

This option adds a Label Cutter to the printer.

£541.89

Buy the Honeywell Datamax OPT78-2618-01.

£650.27

inc VAT

Honeywell Datamax OPT78-2618-01.

Cutter for 4 inch H-Class Printers.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

 

 

RFID READY UPGRADE

This upgrade converts the UHF RFID Ready otion to a fully working state.

Honeywell Datamax OPT78-2667-02.

RFID Ready Upgrade Option L2.

For UK and EU.

For use with RFID Ready Models Only.

This product has been discontinued and is sold out.

For advice on alternatives please ASK.

BARCODE SCANNER OPTION

This option adds a Linear Barcode Scanner to the printer.

£1534.29

Buy the Honeywell Datamax OPT78-2629-01.

£1841.15

inc VAT

Honeywell Datamax OPT78-2629-01.

H4 Linear Scanner Kit.

For Monitoring Picket Fence 1D Barcodes.

AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.

Price does not include delivery charge.

 

 

LABELS

H-4606x printers work with thermal transfer (TT) or direct thermal (DT) media.

TT media needs a ribbon. DT does not.

For details of the label media that can be used with the H-4606x printer please see the Buyers Guide.

The following tables show a selection of Decision self adhesive paper labels which are suitable for the H-4606x.

If you are looking for a label material or size that is not listed or if you need a large quantity please ASK FOR HELP.

Prices are per box and do not include VAT or delivery.

WHITE DT PAPER LABELS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
Diagram showing the layout of Decision DT3825-8P Labels. DT3825-8P 38mm x 25mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 5500 per Roll, 12 Rolls per Box - No Ribbon required. 5-10 days £104.52 BUY
Diagram showing the layout of Decision DT3838-8P Labels. DT3838-8P 38mm x 38mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 3800 per Roll, 12 Rolls per Box - No Ribbon required. 5-10 days £89.16 BUY
Diagram showing the layout of Decision DT5025-8P-PERF Labels. DT5025-8P-PERF 50mm x 25mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 5000 per Roll, 8 Rolls per Box - No Ribbon required. 5-10 days £89.20 BUY
Diagram showing the layout of Decision DT5732-8P Labels. DT5732-8P 57mm x 32mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 4500 per Roll, 8 Rolls per Box - No Ribbon required. 5-10 days £83.68 BUY
Diagram showing the layout of Decision DT7032-8P Labels. DT7032-8P 70mm x 32mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 4500 per Roll, 12 Rolls per Box - No Ribbon required. 5-10 days £137.40 BUY
Diagram showing the layout of Decision DT7651-8P-PERF Labels. DT7651-8P-PERF 76mm x 51mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 2750 per Roll, 8 Rolls per Box - No Ribbon required. 5-10 days £112.24 BUY
Diagram showing the layout of Decision DT7676-8P Labels. DT7676-8P 76mm x 76mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 2000 per Roll, 8 Rolls per Box - No Ribbon required. 5-10 days £95.76 BUY
Diagram showing the layout of Decision DT83140-8P Labels. DT83140-8P 83mm x 140mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 1100 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £58.48 BUY
Diagram showing the layout of Decision DT10252-8P Labels. DT10252-8P 101mm x 52mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 2750 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £67.24 BUY
Diagram showing the layout of Decision DT10276-8P-PERF Labels. DT10276-8P-PERF 102mm x 76mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 2000 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £67.24 BUY
Diagram showing the layout of Decision DT102102-8P-PERF Labels. DT102102-8P-PERF 102mm x 102mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 1500 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £67.24 BUY
Diagram showing the layout of Decision D20066 Labels. D20066 102mm x 152mm DT-Top Direct Thermal Die Cut Label with Gaps, White Top-Coated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 190mm, Perforated, 980 per Roll, 8 Rolls per Box - No Ribbon required. ASK £POA  
Diagram showing the layout of Decision DT102152-8P-PERF Labels. DT102152-8P-PERF 102mm x 152mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 1000 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £67.24 BUY
Diagram showing the layout of Decision DT102200-8P Labels. DT102200-8P 102mm x 200mm DT Direct Thermal Die Cut Label with Gaps, White Uncoated Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 750 per Roll, 4 Rolls per Box - No Ribbon required. 5-10 days £67.24 BUY

WHITE TT PAPER LABELS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
Diagram showing the layout of Decision TT3825-8P Labels. TT3825-8P 38mm x 25mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 5500 per Roll, 12 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £83.64 BUY
Diagram showing the layout of Decision TT3838-8P Labels. TT3838-8P 38mm x 38mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 3800 per Roll, 12 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £74.88 BUY
Diagram showing the layout of Decision TT5025-8P-PERF Labels. TT5025-8P-PERF 50mm x 25mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 5000 per Roll, 8 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £63.92 BUY
Diagram showing the layout of Decision TT5732-8P Labels. TT5732-8P 57mm x 32mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 4500 per Roll, 8 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £76.00 BUY
Diagram showing the layout of Decision TT7032-8P Labels. TT7032-8P 70mm x 32mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 4500 per Roll, 12 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £125.40 BUY
Diagram showing the layout of Decision TT7651-8P-PERF Labels. TT7651-8P-PERF 76mm x 51mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 2750 per Roll, 8 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £76.00 BUY
Diagram showing the layout of Decision TT7676-8P Labels. TT7676-8P 76mm x 76mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 2000 per Roll, 8 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £89.20 BUY
Diagram showing the layout of Decision TT83140-8P Labels. TT83140-8P 83mm x 140mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 1100 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £55.16 BUY
Diagram showing the layout of Decision TT10252-8P-PERF Labels. TT10252-8P-PERF 101mm x 52mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 2750 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £56.28 BUY
Diagram showing the layout of Decision TT10276-8P-PERF Labels. TT10276-8P-PERF 102mm x 76mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 2000 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £56.28 BUY
Diagram showing the layout of Decision TT102102-8P-PERF Labels. TT102102-8P-PERF 102mm x 102mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 1500 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £56.28 BUY
Diagram showing the layout of Decision TT102152-8P-PERF Labels. TT102152-8P-PERF 102mm x 152mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, Perforated, 1000 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £56.28 BUY
Diagram showing the layout of Decision TT102200-8P Labels. TT102200-8P 102mm x 200mm TT Thermal Transfer Die Cut Label with Gaps, White Semi-Gloss Paper, Permanent Adhesive, Outside Wound on 76mm Cores, Maximum Outside Diameter 203mm, 750 per Roll, 4 Rolls per Box - needs a Wax or Wax/Resin Ribbon. 5-10 days £56.28 BUY

RIBBONS

For details of the thermal transfer ribbons that can be used with the H-4606x printer please see the Buyers Guide.

The following tables show a selection of suitable ribbons.

If you are looking for a ribbon material or size that is not listed or need a large quantity please ASK FOR HELP.

Prices are per box and do not include VAT or delivery.

BLACK WAX RIBBONS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
60mm x 450M 1-970645-20-0 60mm x 450m TMX1310 Standard GP02 Black Wax Inside Wound on 25.4mm Diameter Cores, 20 Ribbons per Box ASK £46.40 BUY
90mm x 450M 1-970645-10-0 90mm x 450m TMX1310 Standard GP02 Black Wax Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £69.60 BUY
110mm x 450M 1-970645-01-0 110mm x 450m TMX1310 Standard GP02 Black Wax Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £85.20 BUY

BLACK RESIN ENHANCED WAX RIBBONS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
60mm x 450M I90657-0 60mm x 450m TMX1305 Black Resin Enhanced Wax Inside Wound on 25.4mm Diameter Cores, 20 Ribbons per Box ASK £53.40 BUY
110mm x 450M I90659-0 110mm x 450m TMX1305 Black Resin Enhanced Wax Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £97.90 BUY

BLACK WAX/RESIN RIBBONS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
60mm x 450M 1-970646-25 60mm x 450m TMX2020 Premium HP04 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £89.10 BUY
60mm x 450M 1-970646-63 60mm x 450m TMX2060 Premium HP66 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £150.30 BUY
90mm x 420M I90639-0 90mm x 420m TMX2010 Premium HP06 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £87.80 BUY
90mm x 450M 1-970646-15 90mm x 450m TMX2020 Premium HP04 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £133.70 BUY
90mm x 450M 1-970646-62 90mm x 450m TMX2060 Premium HP66 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £225.40 BUY
110mm x 420M 1-970649-07-0 110mm x 420m TMX2010 Premium HP06 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £107.30 BUY
110mm x 450M 1-970646-05 110mm x 450m TMX2020 Premium HP04 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £163.40 BUY
110mm x 450M 1-970646-07 110mm x 450m TMX2040 Premium HP13 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £177.70 BUY
110mm x 450M 1-970646-61 110mm x 450m TMX2060 Premium HP66 Black Wax/Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £275.50 BUY

BLACK RESIN RIBBONS

SIZE PART NO DESCRIPTION DELIVERY PRICE  
60mm x 450M I90575-0 60mm x 450m TMX3710 Super Premium HR03 Black Resin Inside Wound on 25.4mm Diameter Cores, 20 Ribbons per Box ASK £283.20 BUY
90mm x 450M I90581-0 90mm x 450m TMX3710 Super Premium HR03 Black Resin Inside Wound on 25.4mm Diameter Cores, 20 Ribbons per Box ASK £212.60 BUY
110mm x 450M 1-970647-02-0 110mm x 450m TMX3710 Super Premium HR03 Black Resin Inside Wound on 25.4mm Diameter Cores, 10 Ribbons per Box ASK £259.60 BUY

PRINTHEADS

£999.18

Buy the Honeywell Datamax PHD20-2243-01.

£1199.02

inc VAT

Honeywell Datamax PHD20-2243-01.

600dpi Printhead.

Delivery 2-3 days.

Price does not include delivery charge.

 

 

 

DELIVERY

Our standard charge for 2-3 day delivery to most locations in mainland UK is £10.

This charge is subject to a weight limit of 20Kg.

For consignments which are heavier than 20Kg we reserve the right to add a surcharge.

If your order includes products from more than one manufacturer we may need to ship items from more than one warehouse and in such circumstances there may be a carriage surcharge.

We will agree any carriage surcharge with you before accepting your order.

If you need delivery outside mainland UK please contact us at sales@decisiontechnology.co.uk to confirm the delivery charge before placing your order.

HELP

If you need help please call us on +44 (0)20 8979 5533 or email us at sales@decisiontechnology.co.uk.

We try to respond to emails within a few hours.

Updated 2024-03-26 at 18:34:18.

Errors and Omissions Excepted.