INTERMEC EASYCODER PF8d

PRODUCT DESCRIPTION

Starting at £174.00, including labelling software, the Intermec EasyCoder PF8d is the smallest member of the PF8 family of 4 inch desktop barcode label printers.

The PF8 series is the successor to the PC4 and is designed to handle a wide range of label printing applications at remarkably low cost.

The Intermec PF8d is a very compact 230dpi direct thermal (DT) barcode label printer which sits on a desk or can be mounted vertically on a wall.

The key features of the Intermec PF8d are as follows:

• Compact Direct Thermal Barcode Label Printer.
• Easy to Install.
• Good Paper Handling.
• Label Printing Software, Drivers, Fonts, Barcodes and EPL.
• Good Connectivity.
• Real Time Clock
• Useful Accessories.
• Wide range of media available from Intermec and others.

COMPACT BARCODE LABEL PRINTER

The Intermec PF8d is a direct thermal barcode label printer. It prints directly on thermal labels without the need for a ribbon.

Despite being extremely compact it handles 4 inch wide labels and prints tags and labels at speeds of up to 4ips.

EASY TO INSTALL

The Intermec PF8d is very easy to install on your PC.

The printer comes with a USB cable and a CD.

You simply connect up the printer, power it up, insert the CD into your PC and follow the instructions on the screen.

PAPER HANDLING

The Intermec PF8d prints on die cut thermal labels supported on backing media paper, and continuous media such as thermal paper and thermal card tags.

The printer is equipped with a choice of two sensors which detect the label edge, holes or slots in tags, and black marks printed on the under surface.

The stationery is on rolls or fan-folded.

The rolls are outside wound and up to 5 inch in outside diameter on 1 or 1.5 inch cores.

The roll is housed within the printer. To load a roll you simply open the clam shell casing and place the roll on the support bar.

Fan-folded stationery is passed into the printer via a slot at the rear.

The printed stationery projects from the front of the printer.

The Intermec PF8d is a very compact printer and has no provision to rewind the printed labels internally.

The printer is usually used in "tear-off" mode where the printed stationery is torn off by pulling it against a tear bar.

With the aid of an optional kit the printer can be used in "peel-off" mode. Here individual die cut labels are printed on demand and presented partly peeled from the backing.

Again due to the compactness of the Intermec PF8d the spent backing media cannot be internally rewound and has to be periodically removed.

Finally an optional kit is available to cut paper or thin card label stationery.

SOFTWARE

The Intermec PF8d is supplied with drivers, the LabelShop START entry level label design and printing package, and software utilities.

Although most of us will use the PF8d in conjunction with a PC labelling package it is possible to drive the printer from other types of hardware using the EPL programming language.

The Intermec PF8d has built-in expandable fonts and and a wide range of barcodes which covers both the most common linear barcodes and a selection of the more important 2d codes.

CONNECTING THE PRINTER

The Intermec PF8d offers USB, Serial and Parallel connection as standard.

Optionally Ethernet connection is available using the external EasyLAN 100e accessory from Intermec.

REAL TIME CLOCK

Although unusual for a printer in this class the Intermec PF8d has a Real Time Clock built-in as standard.

This enables the time stamping of media as it prints.

ACCESSORIES

Peel Off and Cutter kits are available as field installable accessories.

In both cases the front plate is removed and replaced with the accessory.

The EasyLAN 100e Ethernet adaptor plugs into the parallel connector on the back of the printer.

MEDIA

The Intermec PF8d requires thermal media.

A range of Economy and Top Coated labels and boards are available from Intermec and others.

The maximum media width including the liner is 4.57" (116mm) and the minimum is 1.00" (25mm).

Where the media uses slots and black marks on the under surface for registration purposes these should be in the centre of the stationery.

THANKS

We thank Intermec for the use of their logo, product images and other graphics.

THANKS

We thank Intermec for the use of their logo, product images and other material.

DISCLAIMER

The above information is based on our current understanding of this product and is believed to be correct.

If your proposed use critically depends on any of the more unusual features you are advised to check with us before placing your order.

We always recommend that you conduct thorough pilot tests before committing to large scale projects.