DATALOGIC POWERSCAN D8500

PRODUCT DESCRIPTION

DATALOGIC POWERSCAN 8000 FAMILY

Starting at  £261.96  the PowerScan D8500 Desk corded 2d barcode laser scanner is part of the Datalogic PowerScan 8000 family of industrial hand-held barcode scanners.

	D8300 Corded Laser Scanner from £251.48		M8300 Cordless Laser Scanner from £438.14		D8500 Corded 1d and 2d Imager from £261.96

DATALOGIC POWERSCAN D8500

The corded PowerScan D8500 Desk is part of an extensive modular system which allows the user to tailor the solution to the problem.

To simplify ordering we offer the following complete kit:

Many other configurations can be constructed from the parts described below.

THE D8500 SCANNER

The PowerScan D8500 is a tough industrial hand-held imager barcode scanner which is sealed to IP65 and is exceptionally easy to install and use.

The scanner can read the following linear barcodes, 2d codes and postal codes:

Code 128, Code 32, Code 39, Code 93, CODABAR, EAN/UPC/JAN, EAN128, GS1 Databar and ITF 2/5.

Aztec, Data Matrix (ECC200), Maxicode, MicroPDF, MacroPDF, PDF417 and QR code.

Australia Post, Japan Post, KIX Code, Planet, Postnet and Royal Mail Code.

Aiming is assisted by a new five light dots system.

Good reads are signalled by the famous Datalogic 3GL system. Two green lights show on the scanner and a green dot is projected on to the barcode.

Damaged barcodes can be reconstructed from multiple reads using the Datalogic PuzzleSolver option.

Choosing the Scanner

The scanner is offered with a choice of three imager optics.

The standard optic is suitable for most general purpose applications. It reads medium and low resolution codes from contact to about 10 inches. The maximum resolution is 4mil on 1d barcodes and 6.6mil on 2d codes.

The high density optic is intended for use with linear barcodes with resolutions down to 2mil and 2d codes down to 4mil.

The wide angle optic is able to capture A4 size images at about 10 inches.

The three D8500 models are:

A cable and an external power supply are required to connect the D8500 scanner.

The D8500 models are multi-interface and work with a range of external power cables which covers all of the major connectivity methods.

Details of the available industrial cables are shown in CABLES

Please note that in all cases an external power supply is required.

A suitable power supply is shown below in POWER SUPPLY

CABLES

A new range of industrial cables has been developed for the new PowerScan family. These are not backwards compatible with earlier Datalogic or PSC products. The D8500 uses a sub-set of these cables which must be used with an external power supply.

The main connectivity options are RS232, Keyboard Wedge and USB.

A list of the available cables is shown below.

Notes

For information on these or other cables please use ASK A QUESTION

An external power supply is required in all cases including Keyboard Wedge and USB connections.

Details of a power supply are shown below in POWER SUPPLY

POWER SUPPLY

The following external power supply is suitable for use in the UK:

Other power cords are available.

ACCESSORIES

There is a useful range of accessories for the PowerScan D8500.

HLD-8000 Desk and Wall Holder

The HLD-8000 is a Holder which can be fixed to a desk or mounted on a wall.

Details are as follows:

HLS-8000 Universal Holster

The HLS-8000 is a protective Nylon holder.

It can be attached to desks, work-tables and other types of equipment.

Details are as follows:

STD-8000 Hands-free Stand

The STD-8000 is a Hands-free Stand.

Details are as follows:

THANKS

We thank Datalogic for the use of their logo, product images and other material.

DISCLAIMER

The above information is based on our current understanding of this product and is believed to be correct.

If your proposed use critically depends on any of the more unusual features you are advised to check with us before placing your order.

We always recommend that you conduct thorough pilot tests before committing to large scale projects.